Experimental Study on Behind-Plate Overpressure Effect by Reactive Material Projectile

详细信息    查看全文

• 作者：Fengyue Xu ; Baoqun Geng ; Xuepeng Zhang ; Jianguang Xiao and Haifu Wang
• 刊名：Propellants, Explosives, Pyrotechnics
• 出版年：2017
• 出版时间：February 2017
• 年：2017
• 卷：42
• 期：2
• 页码：192-197
• 全文大小：1342K
• ISSN：1521-4087

文摘

The behind-plate overpressure effect by a reactive material projectile with a density of 7.7 g cm⁻³ was investigated by ballistic impact and sealed chamber tests. The reactive projectile was launched onto the initially sealed test chamber with a 2024-T3 aluminum cover plate with a thickness of 3 mm, 6 mm, and 10 mm, respectively. Moreover, the overpressure signals in the test chamber were recorded by a pressure sensor and a data acquisition system. The experimental results show that the behind-plate overpressure effect is significantly influenced by plate thickness and impact velocity. For a given plate thickness, the peak overpressure in the test chamber shows an increasing trend with increase of impact velocity. However, for a given impact velocity, when impacting the 6 mm thick aluminum plate, the peak overpressure measured and the impulse delivered to chamber are higher than the values recorded for the 3 mm and 10 mm thick aluminum plates. As such, it is inferred that there is an optimum plate thickness to maximize the behind-plate overpressure effect by reactive projectile.