Observations of coastal cliff base waves, sand levels, and cliff top shaking

详细信息    查看全文

• 作者：Adam P. Young ; Robert T. Guza ; William C. O'Reilly ; Olivier Burvingt and Reinhard E. Flick
• 刊名：Earth Surface Processes and Landforms
• 出版年：2016
• 出版时间：15 September 2016
• 年：2016
• 卷：41
• 期：11
• 页码：1564-1573
• 全文大小：3608K
• ISSN：1096-9837

文摘

Concurrent observations of waves at the base of a southern California coastal cliff and seismic cliff motion were used to explore wave–cliff interaction and test proxies for wave forcing on coastal cliffs. Time series of waves and sand levels at the cliff base were extracted from pressure sensor observations programmatically and used to compute various wave impact metrics (e.g. significant cliff base wave height). Wave–cliff interaction was controlled by tide, incident waves, and beach sand levels, and varied from low tides with no wave–cliff impacts, to high tides with continuous wave–cliff interaction. Observed cliff base wave heights differed from standard Normal and Rayleigh distributions. Cliff base wave spectra levels were elevated at sea swell and infragravity frequencies. Coastal cliff top response to wave impacts was characterized using microseismic shaking in a frequency band (20–45 Hz) sensitive to wave breaking and cliff impacts. Response in the 20–45 Hz band was well correlated with wave–cliff impact metrics including cliff base significant wave height and hourly maximum water depth at the cliff base (r² = 0.75). With site-specific calibration relating wave impacts and shaking, and acceptable anthropogenic (traffic) noise levels, cliff top seismic observations are a viable proxy for cliff base wave conditions. The methods presented here are applicable to other coastal settings and can provide coastal managers with real time coastal conditions. Copyright