Effect of N+Cr alloying on the microstructures and tensile properties of Hadfield steel

详细信息    查看全文

• 作者：C. Chen^a ; F.C. Zhang^a ; ^b ; ^{zfc@ysu.edu.cn" class="auth_mail" title="E-mail the corresponding author} ; F. Wang^a ; H. Liu^c ; B.D. Yu^c
• 关键词：Hadfield steel ; N+Cr alloying ; Strain rate ; Microstructures ; Tensile properties
• 刊名：Materials Science & Engineering A
• 出版年：2017
• 出版时间：2 January 2017
• 年：2017
• 卷：679
• 期：Complete
• 页码：95-103
• 全文大小：3633 K

文摘

The microstructures and tensile behaviors of traditional Hadfield steel, named Mn12 steel, and Hadfield steel alloyed with N+Cr, named Mn12CrN steel were studied through optical microscopy, transmission electron microscopy, and scanning electron microscopy, among others. Three different tensile strain rates of 5×10⁻⁴, 5×10⁻³, and 5×10⁻² s⁻¹ were selected in the tensile test. The deformation microstructures and fracture morphologies of the two steels after fracture in the tensile test were observed to analyze the tensile deformation response to different tensile strain rates. Results showed that the grain size of Mn12CrN steel was evidently refined after alloying with N+Cr. The grain would not become abnormally coarse even with increasing austenitizing temperature. During tensile deformation, the strength and plasticity of Mn12CrN steel were superior to those of Mn12 steel at the same strain rate. With increasing the strain rate, the changes in strength and plasticity of Mn12CrN steel were less sensitive to tensile strain rate compared with Mn12 steel. The effects of grain refinement and N+Cr alloying on dynamic strain aging and deformation twining behaviors were responsible for this lack of sensitivity to strain rate.