Polymer-derived mesoporous Ni/SiOC(H) ceramic nanocomposites for efficient removal of acid fuchsin

详细信息    查看全文

• 作者：Zhaoju Yu^a ; ^b ; ^{zhaojuyu@xmu.edu.cn} ; Shuang Li^a ; Pei Zhang^a ; Yao Feng^a ; Xinya Liu^a
• 关键词：Polymer derived ceramics ; Ceramic nanocomposites ; Porous ceramics ; Magnetic properties ; Dye adsorption
• 刊名：Ceramics International
• 出版年：2017
• 出版时间：1 April 2017
• 年：2017
• 卷：43
• 期：5
• 页码：4520-4526
• 全文大小：1064 K
• 卷排序：43

文摘

In this paper, magnetic porous Ni-modified SiOC(H) ceramic nanocomposites (Ni/SiOC(H)) were successfully prepared via a template-free polymer-derived ceramic route, which involves pyrolysis at 600 °C of nickel-modified allylhydridopolycarbosilane (AHPCS-Ni) precursors synthesized by the reaction of allylhydridopolycarbosilane (AHPCS) with nickel(II)acetylacetonate (Ni(acac)2). The resultant Ni/SiOC(H) nanocomposites are comprised of in-situ formed nanoscaled Ni socialized with small amounts of NiO and nickel silicides embedded in the amorphous SiOC(H) matrix. The materials show ferromagnetic behavior and excellent magnetic properties with the saturation magnetization in the range of 1.71–7.08 emu g−1. Besides, the Ni/SiOC(H) nanocomposites are predominantly mesoporous with a high BET surface area and pore volume in the range of 253–344 and 0.134–0.185 cm3 g−1, respectively. The measured porosity features cause an excellent adsorption capacity towards a template dye acid fuchsin with the adsorption capacity Qt at 10 min of 80.7–85.8 mg g−1 and the Qe at equilibrium of 123.8–129.8 mg g−1.