Effect of zirconium addition on the microstructure and mechanical properties of 15Cr-ODS ferritic Steels consolidated by hot isostatic pressing

详细信息    查看全文

• 作者：Haijian Xu^a ; ^b ; ^{haijianxu@eis.hokudai.ac.jp} ; Zheng Lu^a ; ; Dongmei Wang^a ; Chunming Liu^a
• 关键词：ODS steel ; Mechanical alloying ; Microstructure ; Mechanical property ; HIP
• 刊名：Fusion Engineering and Design
• 出版年：2017
• 出版时间：January 2017
• 年：2017
• 卷：114
• 期：Complete
• 页码：33-39
• 全文大小：3876 K
• 卷排序：114

文摘

The influence of Zr addition on the microstructure and mechanical properties of mechanically alloyed (MA) ODS ferritic steels were studied in this work. The microstructure characteristics included the grain size, oxide particles number densities, size distributions, crystal structures and compositions. TEM foils measurements were complemented by studies of alloys on carbon extraction replica and focus ion beam (FIB) foils. The tensile properties were carried out at different temperatures. The microstructure and mechanical properties were analyzed and compared with nominal compositions (wt.%): Fe-15Cr-2W-0.3Y2O3 and Fe-15Cr −2W-0.3Zr-0.3Y2O3. The experimental revealed that the addition of Zr increased the volume fraction of the smallest and equiaxed ferritic grains, number density of nano-oxide particles and decreased the average size of oxide particles within the ferritic matrix, promoting the formation of fine trigonal δ-phase Y4Zr3O12 nano-oxides and leading to the enhancement of the mechanical properties of the ODS steels.