Effectively enhanced load transfer by interfacial reactions in multi-walled carbon nanotube reinforced Al matrix composites

详细信息    查看全文

• 作者：Weiwei Zhou ; ^{zw05110029@gmail.com} ; Tatsuya Yamaguchi ; Keiko Kikuchi ; Naoyuki Nomura ; Akira Kawasaki ; ^{kawasaki@material.tohoku.ac.jp}
• 关键词：Carbon nanotubes ; Metal matrix composites (MMCs) ; Interfaces ; Thermal analysis ; Mechanical properties
• 刊名：Acta Materialia
• 出版年：2017
• 出版时间：15 February 2017
• 年：2017
• 卷：125
• 期：Complete
• 页码：369-376
• 全文大小：2759 K
• 卷排序：125

文摘

The thermal expansion response of multi-walled carbon nanotube (MWCNT) reinforced Al matrix composites was employed to discuss the improvement of the load transfer at the interface between the MWCNTs and the Al matrix. An aluminum carbide (Al4C3) nanostructure at the end of the MWCNTs, incorporated in the Al matrix, was produced by appropriate heat-treatment. The stress contrast around the Al4C3 observed in the high-resolution transmission electron microscopy (HRTEM) image revealed the evidence of a trace of friction, which would lead to the enhancement of the anchor effect from the Al matrix. This anchor effect of Al4C3 may hinder the local interfacial slippage and constrain the deformation of the Al matrix. As a result, the thermal expansion behavior became linear and reversible under cyclic thermal load. It is concluded that the formation of Al4C3 could effectively enhance the load transfer in MWCNT/Al composites. The yield strength of MWCNT/Al composites was substantially increased under the appropriate quantity of Al4C3 produced at the MWCNT-Al interface by precisely controlled heat-treatment.