Dielectric loss in porous TiO₂

详细信息    查看全文

• 作者：Zachary N. Wing¹ ; John W. Halloran ; ^{peterjon@umich.edu}
• 关键词：TiO2 ; Dielectric properties ; Porosity
• 刊名：Ceramics International
• 出版年：2017
• 出版时间：1 April 2017
• 年：2017
• 卷：43
• 期：5
• 页码：4618-4621
• 全文大小：949 K
• 卷排序：43

文摘

The dielectric loss behavior of TiO2 was characterized on samples of variable porosity and variable pore size. Pores were formed by two methods: varying the sintering temperature and by the addition of a spherical carbon porogen. Porosities varied from 5.9% to 59.3%. Dielectric loss increased with increasing pore volume in each case. However, dielectric loss increased at a slower rate for porogen induced pores. At equivalent pore volumes, pore surface area volumes were higher than those induced using the porogen. Dielectric loss behavior was shown to vary linearly with pore surface area. Our work demonstrates that large pores reduce free surface area and decrease dielectric loss when compared to similar samples with smaller pores. A new model of porous dielectric loss is proposed that characterizes materials based on generalized free surface area instead of porosity alone. Based on this model, we show that the relative loss of porous dielectrics depends critically on the pore surface area and the loss tangent of the parent dielectric.