A consensus process was initiated to provide recommendations for the clinical evaluation of potential therapies to augment fracture repair in patients with meta- and diaphyseal fractures.
Based on the characteristics of fracture healing and fixation, the following study objectives of a clinical study may be appropriate: a) acceleration of fracture union, b) acceleration of return to normal function and c) reduction of fracture healing complications. The intended goal(s) should determine subsequent study methodology. While an acceleration of return to normal function or a reduction of fracture healing complications in and of themselves may be sufficient primary study endpoints for a phase 3 pivotal study, acceleration of fracture union alone is not. Radiographic evaluation may either occur at multiple time points during the healing process with the aim of measuring the time taken to reach a defined status (e.g. cortical bridging of three cortices or disappearance of fracture lines), or could be obtained at a single pre-determined timepoint, were patients are expected to reach a common clinical milestone (i.e. pain free full weight-bearing in weight-bearing fracture cases). Validated Patient Reported Outcomes (PRO's) measures will need to support the return to normal function co-primary endpoints. If reduction of complication rate (e.g. non-union) is the primary objective, the anticipated complications must be defined in the study protocol, along with their possible associations with the specified fracture type and fixation device.
The study design should be randomized, parallel, double-blind, and placebo-controlled, and all fracture subjects should receive a standardized method of fracture fixation, defined as Standard of Care.