Cold experiment of slag centrifugal granulation by rotary atomizer: Effect of atomizer configuration

详细信息    查看全文

• 作者：Jun-Jun Wu^b ; Hong Wang^a ; ^b ; ^{hongwang@cqu.edu.cn} ; Xun Zhu^a ; ^b ; ^{zhuxun@cqu.edu.cn} ; Qiang Liao^a ; ^b ; Kai Li^b
• 关键词：Blast furnace slag ; Centrifugal granulation ; Atomizer configurations ; Granulation modes ; Atomizer design
• 刊名：Applied Thermal Engineering
• 出版年：2017
• 出版时间：25 January 2017
• 年：2017
• 卷：111
• 期：Complete
• 页码：1557-1564
• 全文大小：1786 K
• 卷排序：111

文摘

Centrifugal granulation has recently been employed to produce small blast furnace slag particles, so as to recover the waste heat from the high-temperature molten blast furnace slag. An appropriate atomizer enables centrifugal granulation to become a better cost-effective process for particle production. Thus, increasing emphasis has been placed on influence of atomizer configuration on granulation. In present study, three groups of atomizers were specially designed and the granulation performance of each atomizer was experimentally tested during cold experiments. The influences of atomizer configuration on granulation modes and droplet characteristics were investigated visually. Two modified correlations were proposed to predict the granulating droplet size by means of data fitting. The results indicated that the rotary cup atomizers can inhibit the film formation in contrast to rotary disc atomizer. Moreover, atomizers with outer angle of 90° was capable of producing smaller droplets. The revised correlation as well as the newly-developed correlation including the influence of atomizer configurations, presented in good agreement with the experiment data. In addition, an analysis on atomizer design was conducted to provide a good insight for industrialization. It was recommended to adopt cup-like atomizer in granulation for its ability to produce fine particles with smaller atomizer size.