Surface contaminants inhibit osseointegration in a novel murine model

详细信息    查看全文

• 作者：Lindsay A.  ; Bonsignore^a ;   ; ^b ; Robb W.  ; Colbrunn^e ; Joscelyn M.  ; Tatro^a ; Patrick J.  ; Messerschmitt^a ; Christopher J.  ; Hernandez^c ; Victor M.  ; Goldberg^a ; Matthew C.  ; Stewart^f ; Edward M.  ; Greenfield^a ;   ; ^b ;   ; ^d ;   ; ^{edward.greenfield@case.edu}
• 关键词：Contaminants ; Osseointegration ; Murine ; Histomorphometry ; Biomechanical testing
• 刊名：Bone
• 出版年：2011
• 出版时间：November 2011
• 年：2011
• 卷：49
• 期：5
• 页码：923-930
• 全文大小：1383 K

文摘

Surface contaminants, such as bacterial debris and manufacturing residues, may remain on orthopedic implants after sterilization procedures and affect osseointegration. The goals of this study were to develop a murine model of osseointegration in order to determine whether removing surface contaminants enhances osseointegration. To develop the murine model, titanium alloy implants were implanted into a unicortical pilot hole in the mid-diaphysis of the femur and osseointegration was measured over a five week time course. Histology, backscatter scanning electron microscopy and X-ray energy dispersive spectroscopy showed areas of bone in intimate physical contact with the implant, confirming osseointegration. Histomorphometric quantification of bone-to-implant contact and peri-implant bone and biomechanical pullout quantification of ultimate force, stiffness and work to failure increased significantly over time, also demonstrating successful osseointegration. We also found that a rigorous cleaning procedure significantly enhances bone-to-implant contact and biomechanical pullout measures by two-fold compared with implants that were autoclaved, as recommended by the manufacturer. The most likely interpretation of these results is that surface contaminants inhibit osseointegration. The results of this study justify the need for the development of better detection and removal techniques for contaminants on orthopedic implants and other medical devices.