Effects of composite adherend properties on stresses in double lap bonded joints

详细信息    查看全文

• 作者：M. Mokhtari^a ; ¹ ; K. Madani^a ; ¹ ; ^{koumad10@yahoo.fr} ; ^{kouider.madani@univ-lr.fr} ; M. Belhouari^a ; ¹ ; S. Touzain^b ; ² ; X. Feaugas^b ; ² ; M. Ratwani^c
• 刊名：Materials and Design
• 出版年：2013
• 出版时间：February, 2013
• 年：2013
• 卷：44
• 期：Complete
• 页码：633-639
• 全文大小：582 K

文摘

The effects of composite layer stiffness, thickness and ply orientations on stresses in the adhesive layer of a double lap bonded joint are investigated using three-dimensional finite element analysis code ABAQUS. A special 3-layer modelling technique is used in the finite element analysis. The non-linear behaviour of adhesive is also considered. Six composite laminates with different ply orientations are used in the lap-joint analysis. The composite materials considered in the analysis are - carbon epoxy, boron epoxy, T300/934 graphite-epoxy, and aramid epoxy. The analysis results indicate that the maximum stress in the adhesive can be significantly reduced by changing the stiffness and fibre orientations in the composite layer. Also, the use of hybrid composite (changing the nature of the fibres in two layers which are near the adhesive layer) results in reducing adhesive shear stresses.