Assembly and validation of the SSD silicon microstrip detector of ALICE
详细信息 查看全文
- 作者：M. Bregant ; O. Borysov ; L. Bosisio ; P. Camerini ; G. Contin ; F. Faleschini ; E. Fragiacomo ; N. Grion ; G.-V. Margagliotti ; S. Piano et al.
- 关键词：Double-sided AC silicon strip detector ; ALICE ITS
- 刊名：Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
- 出版年：2006
- 出版时间：1 October 2006
- 年：2006
- 卷：566
- 期：1
- 页码：18-21
- 全文大小：215 K
文摘
The Silicon Strip Detector (SSD) forms the two outermost layers of the Inner Tracking System (ITS) of ALICE. The SSD detector consists of 1698 double-sided silicon microstrip modules. The electrical connection between silicon sensor and front-end electronics is made via TAB-bonded aluminium–polyimide cables (chip-cables). The module assembly is challenging because of the module geometry and the use of chip-cables. This article describes the assembly procedure and the test protocol used.