The impact of core-shell nanotube structures on fracture in ceramic nanocomposites

详细信息    查看全文

• 作者：Xin Liang^a ; ^b ; Yingchao Yang^c ; Jun Lou^c ; Brian W. Sheldon^a ; ^{brian_sheldon@brown.edu" class="auth_mail" title="E-mail the corresponding author}
• 关键词：Ceramics ; Composites ; Carbon nanotube ; Fracture
• 刊名：Acta Materialia
• 出版年：2017
• 出版时间：1 January 2017
• 年：2017
• 卷：122
• 期：Complete
• 页码：82-91
• 全文大小：3285 K

文摘

Multi-wall carbon nanotubes (MWCNTs) can be used to create ceramic nanocomposites with improved fracture toughness. In the present work, atomic layer deposition (ALD) was employed to deposit thin oxide layers on MWCNTs. These core-shell structures were then used to create nanocomposites by using a polymer derived ceramic (PDC) to produce the matrix. Variations in both the initial MWCNT structure and the oxide layers led to substantial differences in fiber-pullout behavior. Single tube pullout tests also showed that the oxide coatings led to stronger bonding with the ceramic matrix. With high defect density MWCNTs, this led to shorter pull-out lengths which is consistent with the conventional understanding of fracture in ceramic matrix composites. However, with low defect density MWCNTs longer pullout lengths were observed with the oxide layers. To interpret the different trends that were observed, we believe that the ALD coatings should not be viewed simply as a means of altering the interfacial properties. Instead, the coated MWCNTs should be viewed as more complex core-shell fibers where both interface and internal properties can be controlled with the ALD layers.