Interaction of a Railway Tunnel with a Deep Slow Landslide in Clay Shales

详细信息    查看全文

• 作者：Roberto Vassallo ; ^{roberto.vassallo@unibas.it" class="auth_mail" title="E-mail the corresponding author} ; Mayank Mishra ; Giuseppe Santarsiero ; Angelo Masi
• 关键词：landslide ; tunnel ; interaction ; displacements ; earth pressure
• 刊名：Procedia Earth and Planetary Science
• 出版年：2016
• 出版时间：2016
• 年：2016
• 卷：16
• 期：Complete
• 页码：15-24
• 全文大小：1139 K

文摘

The Varco d’Izzo landslide system (Basilicata Region, Italy) develops at the suburbs of the city of Potenza, capital of the region, and is crossed by two transport infrastructures of local importance: the national highway Basentana and the national railway line. This paper is focused on the effects of slope movements on the railway tunnel which was built in the accumulation of an earthflow of the landslide system. The earthflow displacements were slow but continuous in the monitoring period 2005-2015 and in the order of one to several cm/year. They have led, not far from the railway tunnel area, to the eviction of a house, the dismantling of a pedestrian bridge, damages to roads and other structures. The tunnel was completely re-built in 1992 between two rows of piles, by the cut-and-cover method, after the previous tunnel had suffered severe damage due to the landslide. Available inclinometer data seem to suggest that, locally, the tunnel with its piles is hindering landslide displacements. In fact, measurements carried out in the vicinity of the tunnel, upslope from it, do not show a slip surface crossing the piles. On the other hand, landslide displacements are observed both farther, upslope from the tunnel, and downslope from it. The resultant of earth pressures acting on the tunnel is thus, probably, increasing with time. The distribution of landslide displacements around the tunnel until recent years is herein analyzed. Results of site surveys are reported. The causes of the current state of deformation of the tunnel, which was evaluated by laserscanning, are examined with the help of simplified calculations and FEM simulations.