Analysis of organic aerosols collected on filters by Aerosol Mass Spectrometry for source identification

详细信息    查看全文

• 作者：Leigh R. Crilley ; Godwin A. Ayoko ; Lidia Morawska
• 关键词：Organic aerosols ; Aerosol Mass Spectrometry ; Source ; Filter samples
• 刊名：Analytica Chimica Acta
• 出版年：25 November, 2013
• 年：2013
• 卷：803
• 期：Complete
• 页码：91-96
• 全文大小：546 K

文摘

Aerosol Mass Spectrometers (AMS) are powerful tools in the analysis of the chemical composition of airborne particles, particularly organic aerosols which are gaining increasing attention. However, the advantages of AMS in providing on-line data can be outweighed by the difficulties involved in its use in field measurements at multiple sites. In contrast to the on-line measurement by AMS, a method which involves sample collection on filters followed by subsequent analysis by AMS could significantly broaden the scope of AMS application. We report the application of such an approach to field studies at multiple sites. An AMS was deployed at 5 urban schools to determine the sources of the organic aerosols at the schools directly. PM₁ aerosols were also collected on filters at these and 20 other urban schools. The filters were extracted with water and the extract run through a nebulizer to generate the aerosols, which were analyzed by an AMS. The mass spectra from the samples collected on filters at the 5 schools were found to have excellent correlations with those obtained directly by AMS, with r² ranging from 0.89 to 0.98. Filter recoveries varied between the schools from 40 to 115%, possibly indicating that this method provides qualitative rather than quantitative information. The stability of the organic aerosols on Teflon filters was demonstrated by analysing samples stored for up to two years. Application of the procedure to the remaining 20 schools showed that secondary organic aerosols were the main source of aerosols at the majority of the schools. Overall, this procedure provides accurate representation of the mass spectra of ambient organic aerosols and could facilitate rapid data acquisition at multiple sites where AMS could not be deployed for logistical reasons.