Analysis of structure and deformation behavior of AISI 316L tensile specimens from the second operational target module at the Spallation Neutron Source

详细信息    查看全文

• 作者：M.N. Gussev^a ; D.A. McClintock^a ; ^{mcclintockda@ornl.gov" class="auth_mail" title="E-mail the corresponding author} ; F.A. Garner^b
• 关键词：Spallation Neutron Source ; 316L stainless steel ; Neutron irradiation ; Proton irradiation ; Tensile behavior ; deformation wave phenomenon ; Transformation induced plasticity (TRIP) ; Phase transformation
• 刊名：Journal of Nuclear Materials
• 出版年：2016
• 出版时间：January 2016
• 年：2016
• 卷：468
• 期：Complete
• 页码：210-220
• 全文大小：4899 K

文摘

In an earlier publication, tensile testing was performed on specimens removed from the first two operational targets of the Spallation Neutron Source (SNS). There were several anomalous features in the results. First, some specimens had very large elongations (up to 57%) while others had significantly smaller values (10–30%). Second, there was a larger than the usual amount of data scatter in the elongation results. Third, the stress–strain diagrams of nominally similar specimens spanned a wide range of behavior ranging from expected irradiation-induced hardening to varying levels of force drop after yield point and indirect signs of “traveling deformation wave” behavior associated with strain-induced martensite formation. To investigate the cause(s) of such variable tensile behavior, several specimens from Target 2, spanning the range of observed tensile behavior, were chosen for detailed microstructural examination using electron backscatter diffraction (EBSD) analysis. It was shown that the steel employed in the construction of the target contained an unexpected bimodal grain size distribution, containing very large out-of-specification grains surrounded by “necklaces” of grains of within-specification sizes. The large grains were frequently comparable to the width of the gauge section of the tensile specimen. The propensity to form martensite during deformation was shown to be accelerated by radiation but also to be very sensitive to the relative orientation of the grains with respect to the tensile axis. Specimens having large grains in the gauge that were most favorably oriented for production of martensite strongly exhibited the traveling deformation wave phenomenon, while those specimens with less favorably oriented grains had lesser or no degree of the wave effect, thereby accounting for the observed data scatter.