Experimental study on thermoelectric modules for power generation at various operating conditions

详细信息    查看全文

• 作者：Wei-Hsin Chen ; Chen-Yeh Liao ; Chen-I Hung ; Wei-Lun Huang
• 关键词：Thermoelectric module and generator ; Power generation ; Waste-heat recovery ; Series connection ; Peltier effect
• 刊名：Energy
• 出版年：2012
• 出版时间：September, 2012
• 年：2012
• 卷：45
• 期：1
• 页码：874-881
• 全文大小：683 K

文摘

Commercially available thermoelectric modules are useful devices to recover low-temperature waste heat for power generation. To understand the characteristics of power generation from thermoelectric modules (TEMs), the performances of TEMs at various flow patterns, heating temperatures, flow rates of water and numbers of modules in series are studied experimentally. The results show that the effects of flow pattern of heat sink and water flow rate on the performance are not significant, but the heat source or heating temperature plays an important role. Therefore, a lower water flow rate is suggested to save power, whereas a higher hot-side temperature which leads to a larger temperature difference is recommended to give better performances of TEMs. Increasing number of modules in series provide higher output power. However, the performance of the modules in series cannot be simply predicted using linear superposition due to the Peltier effect and the non-uniformity of every module. The feature of a thermoelectric generator (TEG) is also examined and compared with the TEMs. It is found that TEM is a better choice for power generation from recovering waste heat if the temperature of a system is below 150?¡ãC.