Investigations into the movement of milled medium in the bowl of a ring-roller mill

详细信息    查看全文

• 作者：Robert Junga ; Stanisł ; aw Mateuszuk ; Janusz Pospolita
• 关键词：Ring-roller mill ; Coal ; Silica sand ; Movement on the bowl/table
• 刊名：Powder Technology
• 出版年：2009
• 出版时间：4 April 2009
• 年：2009
• 卷：191
• 期：1-2
• 页码：61-71
• 全文大小：1306 K

文摘

This paper presents the results of testing the grind material movement in a ring-roller milling system. The tests were carried out in a 1:4 scale model of an RP-1043x`milling system. The aim of the test was to determine material bulk shapes within a range of parameter changes of a model grinding system i.e. table–roller distancing, pile-up ring height, coal feed and table's rotary speed. Based on the measurements of material layer thickness on the table, its average radial velocity was calculated. The results were then supplemented with tests based on the movement of markers over the surface layer of the coal bulk. These tests enabled the material's average radial and tangential velocities in the surface layer to be determined.