Preparation of cube micrometer potassium niobate (KNbO₃) by hydrothermal method and sonocatalytic degradation of organic dye

详细信息    查看全文

• 作者：Hongbo Zhang^a ; Chunsheng Wei^a ; ^b ; Yingying Huang^a ; Jun Wang^a ; ^{wangjun890@126.com" class="auth_mail" title="E-mail the corresponding author}
• 关键词：Ultrasonic irradiation ; Sonocatalytic degradation ; Potassium niobate (KNbO3) ; Organic dye
• 刊名：Ultrasonics Sonochemistry
• 出版年：2016
• 出版时间：May 2016
• 年：2016
• 卷：30
• 期：Complete
• 页码：61-69
• 全文大小：2015 K

文摘

Cube micrometer potassium niobate (KNbO₃) powder, as a high effective sonocatalyst, was prepared using hydrothermal method, and then, was characterized by X-ray diffractometer (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). In order to evaluate the sonocatalytic activity of prepared KNbO₃ powder, the sonocatalytic degradation of some organic dyes was studied. In addition, some influencing factors such as heat-treatment temperature and heat-treatment time on the sonocatalytic activity of prepared KNbO₃ powder and catalyst added amount and ultrasonic irradiation time on the sonocatalytic degradation efficiency were examined by using UV–visible spectrophotometer and Total Organic Carbon (TOC) determination. The experimental results showed that the best sonocatalytic degradation ratio (69.23%) of organic dyes could be obtained when the conditions of 5.00 mg/L initial concentration, 1.00 g/L prepared KNbO₃ powder (heat-treated at 400 °C for 60 min) added amount, 5.00 h ultrasonic irradiation (40 kHz frequency and 300 W output power), 100 mL total volume and 25–28 °C temperature were adopted. Therefore, the micrometer KNbO₃ powder could be considered as an effective sonocatalyst for treating non- or low-transparent organic wastewaters.