Squeezing-to-dripping transition for bubble formation in a microfluidic T-junction

详细信息    查看全文

• 作者：Taotao Fu ; Youguang Ma ; Denis Funfschilling ; Chunying Zhu ; Huai Z. Li
• 关键词：Bubble formation ; Microfluidic T-junction ; Squeezing-to-dripping ; Slug bubble ; Dispersed bubble ; Two-step model
• 刊名：Chemical Engineering Science
• 出版年：2010
• 出版时间：15 June 2010
• 年：2010
• 卷：65
• 期：12
• 页码：3739-3748
• 全文大小：504 K

文摘

The aim of this paper is to investigate the squeezing-to-dripping transition for bubble formation in a microfluidic T-junction by cross-flowing rupture technique using a high-speed digital camera. Experiments were conducted in a glass microfluidic T-junction with the cross-section of the microchannel of 120 μm wide and 40 μm deep. N₂ bubbles were generated in glycerol–water mixtures with several concentrations of surfactant sodium dodecyl sulfate (SDS). Three different regimes were identified for generating different kinds of bubbles: squeezing, dripping and transition regimes. Various forces exerted on the gaseous thread in different regimes were analyzed. Long slug bubbles were formed in the squeezing regime, while dispersed bubbles in the dripping regime. The transition regime formed short slug bubbles. The bubble sizes in various regimes could be correlated with several dimensionless numbers such as the ratio of gas/liquid flow rates and capillary number. The two-step model for droplets (Steegmans et al., 2009) was extended to describe the bubble formation.