Susceptibility of ternary aluminum alloys to cracking during solidification

详细信息    查看全文

• 作者：Jiangwei Liu^a ; Sindo Kou^b ; ^{kou@engr.wisc.edu}
• 关键词：Welding ; Ring casting ; Solidification cracking ; Hot tearing ; Al-Mg-Si alloys ; Al-Cu-Mg alloys ; Al-Cu-Si alloys ; Heat transfer ; Mass transfer
• 刊名：Acta Materialia
• 出版年：2017
• 出版时间：15 February 2017
• 年：2017
• 卷：125
• 期：Complete
• 页码：513-523
• 全文大小：4288 K
• 卷排序：125

文摘

The crack susceptibility map of a ternary Al alloy system provides useful information about which alloy compositions are most susceptible to cracking and thus should be avoided by using a filler metal with a significantly different composition. In the present study the crack susceptibility maps of ternary Al alloy systems were calculated based on the maximum |dT/d(fS)1/2| as an index for the crack susceptibility, where T is temperature and fS fraction solid. Due to the complexity associated with ternary alloy solidification, commercial thermodynamic software Pandat and Al database PanAluminum, instead of analytical equations, were used to calculate fS as a function of T and hence the maximum |dT/d(fS)1/2| for ternary Al-Mg-Si, Al-Cu-Mg and Al-Cu-Si alloy systems. A crack susceptibility map covering 121 alloy compositions was constructed for each of the three ternary alloy systems at each of the following three levels of back diffusion: no back diffusion, back diffusion under a 100 °C/s cooling rate, and back diffusion under 20° C/s. The location of the region of high crack susceptibility, which is the most important part of the map, was shown in each of the nine calculated maps. These locations were compared with those observed in crack susceptibility tests by previous investigators. With back diffusion considered, either under 20 or 100 °C/s, the agreement between the calculated and observed maps was good especially for Al-Mg-Si and Al-Cu-Mg. Thus, the maximum |dT/d(fS)1/2| can be used as a crack susceptibility index to construct crack susceptibility maps for ternary Al alloys and to evaluate the effect of back diffusion on their crack susceptibility.