Effect of fine particle incorporation into matrix on mechanical properties of plain woven carbon fiber reinforced plastics fabricated with vacuum assisted resin transfer molding

详细信息    查看全文

• 作者：Satoshi Kobayashi ; ^{koba@tmu.ac.jp" class="auth_mail" title="E-mail the corresponding author} ; Jun Kitagawa
• 关键词：A. Laminates ; A. Particle-reinforcement ; B. Fracture toughness ; D. Mechanical testing ; E. Resin transfer molding (RTM)
• 刊名：Composites Part B: Engineering
• 出版年：2016
• 出版时间：February 2016
• 年：2016
• 卷：85
• 期：Complete
• 页码：31-40
• 全文大小：3352 K

文摘

Purpose of this study is to improve mechanical properties of the carbon fiber reinforced plastic laminates (CFRP), such as inter-laminar fracture properties, by addition of fine particle to matrix resin. Vinyl ester was used for the CFRP matrix and two types of fine particle, alumina and silicon rubber were used for the modifier. CFRP laminates were fabricated with vacuum assisted resin transfer molding. Single end notched bending tests on resin specimens, and tensile, three point bending, double cantilever bending and end notched flexural tests were conducted on CFRP laminates to investigate the effect of particle incorporation on mechanical properties CFRP laminates. In situ observation was also conducted during tests to discuss the role of fine particles. From the results, soft particle, such as silicon rubber, is effective to improve mode I inter-laminar fracture toughness through cavitation formation. Rigid particles, such as alumina, could improve mode II inter-laminar fracture toughness by bridging between crack surfaces.