Digitally synchronized LCD projector for multi-color fluorescence excitation in parallel capillary electrophoresis detection

详细信息    查看全文

• 作者：Shi-Wei Lin ; Chih-Hang Chang ; Dai-Yang Wu ; Che-Hsin Lin
• 关键词：LCD projector ; Capillary electrophoresis ; Digitally-modulated ; UV– ; vis– ; NIR spectrometer ; Multi-color detection
• 刊名：Biosensors and Bioelectronics
• 出版年：2010
• 出版时间：15 October 2010
• 年：2010
• 卷：26
• 期：2
• 页码：717-722
• 全文大小：985 K

文摘

A simple method is proposed for modulating the excitation light used for multi-color fluorescence detection in a single capillary electrophoresis (CE) channel. In the proposed approach, a low-cost commercial liquid crystal device (LCD) projector with digitally-modulated LCD switches is used to provide the illumination light source and the fluorescence emitted from the CE chip is synchronously detected using an ultraviolet–visible–near infrared (UV–vis–NIR) spectrometer. The modulated light source enables the detection of multiple fluorescence signals within a single CE channel without the need of mechanically switching optical components. In order to enhance the sensing performance of the proposed system, two short-pass filters and one band-pass filter are inserted into the LCD projector to modify the wavelength spectra for fluorescence excitation. With this simple approach, the signal-to-noise (SN) ratio of the fluorescence detection signals is greatly improved by a factor of approximately 22 when detecting Atto647N fluorescent dye. The feasibility of the proposed multi-color CE detection approach is demonstrated by detecting two different samples including a mixed sample comprising FITC, Rhodamine B and Atto647N fluorescent dyes and a bio-sample composed of two ssDNAs labeled with FITC and Cy3, respectively. Results confirm that the digitally-modulated excitation system proposed in this study has significant potential for the parallel analysis of fluorescently-labeled bio-samples using a multi-color detection scheme.