Joining mechanism between Al₂O₃-Ag-Cu-Ti composite coating and GCr15 substrate

详细信息    查看全文

• 作者：Langping Wang ; ^{aplpwang@hit.edu.cn} ; Wei Jiang ; Zhuo Yang ; Xiaofeng Wang ; Yang Lu ; Wenquan Lv
• 关键词：Joining ; Al2O3&ndash ; Ag&ndash ; Cu&ndash ; Ti ; Coating ; Plasma spraying ; GCr15
• 刊名：Surface and Coatings Technology
• 出版年：2013
• 出版时间：25 May, 2013
• 年：2013
• 卷：223
• 期：Complete
• 页码：98-103
• 全文大小：1194 K

文摘

Using a mixture of Al₂O₃, Ag, Cu, and Ti particles, an Al₂O₃-Ag-Cu-Ti composite coating was fabricated on GCr15 substrate by plasma spraying. To obtain strong joining between the composite coating and substrate, samples were heated at 700-1000 ¡ãC for 10 min in a vacuum chamber. The microstructure and composition of the coating were characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and X-ray diffraction (XRD). SEM images revealed that the shapes of the Ag and Cu particles in the coating changed because of a eutectic reaction when the joining temperature exceeded 800 ¡ãC. SEM and XRD results showed that a thin TiC and Ti₂Fe composite layer was formed at or close to the interface when the joining temperature was above 900 ¡ãC. In addition, an obvious reaction layer with a concentration of elemental Ti between the Ag-Cu-Ti alloy and the Al₂O₃ particle was formed when the joining temperature exceeded 800 ¡ãC. Evaluation of the mechanical properties of the join between the composite coating and the substrate was performed using an impact tester, and the sample joined at 900 ¡ãC showed excellent adhesion strength and toughness.