Combined sample collection and gas extraction for the measurement of helium isotopes and neon in natural waters

详细信息    查看全文

• 作者：Wolfgang Roether ; ^{wroether@physik.uni-bremen.de} ; Martin Vogt ^{martin.vogt@uni-bremen.de} ; Sandra Vogel ^{sandra.erdmann@googlemail.com} ; Jü ; rgen Sü ; ltenfuß ; ^{suelten@uni-bremen.de}
• 关键词：Efficient water sampling ; Accurate water samples ; Dissolved gases ; Helium isotopes ; Neon
• 刊名：Deep Sea Research Part I: Oceanographic Research Papers
• 出版年：2013
• 出版时间：June, 2013
• 年：2013
• 卷：76
• 期：Complete
• 页码：27-34
• 全文大小：588 K

文摘

We present a new method to obtain samples for the measurement of helium isotopes and neon in water, to replace the classical sampling procedure using clamped-off Cu tubing containers that we have been using so far. The new method saves the gas extraction step prior to admission to the mass spectrometer, which the classical method requires. Water is drawn into evacuated glass ampoules with subsequent flame sealing. Approximately 50 % headspace is left, from which admission into the mass spectrometer occurs without further treatment. Extensive testing has shown that, with due care and with small corrections applied, the samples represent the gas concentrations in the water within ¡À0.07 % (95 % confidence level; ¡À0.05 % with special handling). Fast evacuation is achieved by pumping on a small charge of water placed in the ampoule. The new method was successfully tested at sea in comparison with Cu-tubing sampling. We found that the ampoule samples were superior in data precision and that a lower percentage of samples were lost prior to measurement. Further measurements revealed agreement between the two methods in helium, ³He and neon within ¡À0.1 % . The new method facilitates the dealing with large sample sets and minimizes the delay between sampling and measurement. The method is applicable also for gases other than helium and neon.