用户名: 密码: 验证码:
Multiscale characterization of carbonated wollastonite paste and application of homogenization schemes to predict its effective elastic modulus
详细信息    查看全文
文摘
This paper describes the multiscale characterization of the carbonated wollastonite paste using X-ray diffraction (XRD), scanning electron microscopy with energy dispersive spectroscopy (SEM/EDS), and statistical nanoindentation (SNI, also known as ‘grid indentation’) methods as well as micromechanical homogenization models. Wollastonite (CaSiO3) fibers are commonly used as filler in ceramics or plastics. However, wollastonite can also be regarded as non-hydraulic binder material since upon carbonation it forms a heterogeneous matrix with mechanical properties similar to those of the conventional hydrated cement pastes. Carbonation reaction of wollastonite results in the formation of two main products: calcium carbonate (CaCO3) and amorphous silica gel (SiO2). The SEM/EDS microanalysis performed on this system revealed that the average calcium to silica (Ca/Si) atomic ratio of the silica gel phase was around 0.40. Three individual carbonated wollastonite paste samples, each representing a different degree of carbonation were selected for nanoindentation tests. The obtained elastic moduli for silica gel, calcium carbonate, and unreacted wollastonite grains were, respectively, 41.7 GPa, 67.3 GPa, and 134.7 GPa. The micromechanical homogenization models were then utilized to predict the effective (also referred to as ‘homogenized’) elastic moduli of the carbonated wollastonite paste. The predicted values of the effective elastic moduli of carbonated wollastonite pastes were found to be in the range of corresponding values for hydrated high to ultra-high performance cement pastes. Additionally, the values of the effective elastic moduli of the carbonated wollastonite pastes were observed to increase with the increase in the degree of carbonation.

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700