Polyaniline-based electrocatalysts through emulsion polymerization: Electrochemical and electrocatalytic performances

详细信息    查看全文

• 作者：Shehnaz^a ; Xuedan Song^a ; Suzhen Ren^a ; ¹ ; ^{rensz@dlut.edu.cn} ; Ying Yang^a ; Yanan Guo^a ; Hongyu Jing^a ; Qing Mao^b ; Ce Hao^a ; ^{haoce@dlut.edu.cn}
• 关键词：Emulsion polymerization ; Interfacial conductivity ; FeCoPANI ; Non-precious metal electrocatalyst ; Oxygen reduction reaction
• 刊名：Journal of Energy Chemistry
• 出版年：2017
• 出版时间：January 2017
• 年：2017
• 卷：26
• 期：1
• 页码：182-192
• 全文大小：2218 K
• 卷排序：26

文摘

One of the major challenges associated with fuel cells is the design of highly efficient electrocatalysts to reduce the high overpotential of the oxygen reduction reaction (ORR). Here we report Polyaniline (PANI) based micro/nanomaterials with or without transition metals, prepared by the emulsion polymerization and subsequent heat treatment. PANI microspheres with the diameter of about 0.7 µm have been prepared in basic (NH3 solution) condition, using two different types of surfactant (CTAB, SDS) as the stabilizer, ammonium persulphate (APS) as oxidant with aniline/surfactants molar ratio at 1/1 under the hydrothermal treatment. PANI nanorods, FePANI, and FeCoPANI have been synthesized in acidic (HCl) medium with aniline/surfactants molar ratio at 1/2 and polymerization carried out without stirring for 24 h. Products mainly FeCoPANI have shown high current density with increasing sweep rate and excellent specific capacitance 1753 F/g at the scan rate of 1 mV/s. Additionally, it has shown high thermal stability by thermogravimetric analysis (TGA). FePANI has been investigated for excellent performance toward ORR with four electron selectivity in the basic electrolyte. The PANI-based catalysts from emulsion polymerization demonstrate that the method is valuable for making non-precious metal heterogeneous electrocatalysts for ORR or energy storage and conversion technology.