Effects of gaseous ammonia direct injection on performance characteristics of a spark-ignition engine

详细信息    查看全文

• 作者：Kyunghyun Ryu ; George E. Zacharakis-Jutz ; Song-Charng Kong
• 关键词：Ammonia combustion ; Spark-ignition engine ; Alternative fuel ; Non-carbon fuel
• 刊名：Applied Energy
• 出版年：1 March, 2014
• 年：2014
• 卷：116
• 期：Complete
• 页码：206-215
• 全文大小：1940 K

文摘

The effects of direct injection of gaseous ammonia on the combustion characteristics and exhaust emissions of a spark-ignition engine were investigated. Port-injection gasoline was used to enhance the burning of ammonia that was directly injected into the engine cylinder. Appropriate direct injection strategies were developed to allow ammonia to be used in spark-ignition engines without sacrifice of volumetric efficiency. Experimental results show that with gasoline providing the baseline power of 0.6 kW, total engine power could increase to 2.7 kW when the injection timing of ammonia was advanced to 370 BTDC with injection duration of 22 ms. Engine performance with use of gasoline-ammonia was compared to that with gasoline alone. For operations using gasoline-ammonia, with baseline power from gasoline at 0.6 kW the appropriate ammonia injection timing was found to range from 320 to 370 BTDC for producing 1.5-2.7 kW. The peak pressures were slightly lower than those using gasoline alone because of the lower flame of ammonia, resulting in reduction of cylinder pressure. The brake specific energy consumption (BSEC) with gasoline-ammonia was very similar to that with gasoline alone. Ammonia direct injection caused slight reductions of BSCO for all the loads studied but significantly increased BSHC because of the reduced combustion temperature of ammonia combustion. The use of ammonia resulted in increased NOx emissions because of formation of fuel NOx. Ammonia slip was also detected in the engine exhaust because of incomplete combustion.