Three-dimensional simulations of non-isothermal transient flow and flow-induced stresses during the viscoelastic fluid filling process

详细信息    查看全文

• 作者：Xin Zhuang <sup>zhuangxin1983@126.com" class="auth_mail" title="E-mail the corresponding authorsup> ; Jie Ouyang<sup> ; sup><sup>jieouyang@nwpu.edu.cn" class="auth_mail" title="E-mail the corresponding authorsup> ; Wuming Li <sup>liwum0626@126.com" class="auth_mail" title="E-mail the corresponding authorsup> ; Yanggui Li <sup>liyanggui@126.com" class="auth_mail" title="E-mail the corresponding authorsup>
• 关键词：Non-isothermal ; XPP fluid ; Flow-induced stresses ; 3D filling process ; Two-phase flow
• 刊名：International Journal of Heat and Mass Transfer
• 出版年：2017
• 出版时间：January 2017
• 年：2017
• 卷：104
• 期：Complete
• 页码：374-391
• 全文大小：4485 K

文摘

<dl class="listitem" id="list_l0005"><dt class="label">•dt><dd>

d="p0005">A 3D non-isothermal Newtonian&ndash;viscoelastic two-phase flow model is proposed.

dd><dt class="label">•dt><dd>

d="p0010">A high resolution revised level set method is extended to capture 3D melt fronts in injection molding.

dd><dt class="label">•dt><dd>

d="p0015">The temperature field and flow-induced stresses in 3D filling process are successfully predicted.

dd><dt class="label">•dt><dd>

d="p0020">The effects of processing conditions and energy source term on the flow induced-stresses are investigated.

dd>dl>