Harvesting Low-Frequency (<5 Hz) Irregular Mechanical Energy: A Possible Killer Application of Triboelectric Nanogenerator

详细信息    查看全文

• 作者：Yunlong Zi ; Hengyu Guo ; Zhen Wen ; Min-Hsin Yeh ; Chenguo Hu ; Zhong Lin Wang
• 刊名：ACS Nano
• 出版年：2016
• 出版时间：April 26, 2016
• 年：2016
• 卷：10
• 期：4
• 页码：4797-4805
• 全文大小：588K
• 年卷期：0
• ISSN：1936-086X

文摘

Electromagnetic generators (EMGs) and triboelectric nanogenerators (TENGs) are the two most powerful approaches for harvesting ambient mechanical energy, but the effectiveness of each depends on the triggering frequency. Here, after systematically comparing the performances of EMGs and TENGs under low-frequency motion (<5 Hz), we demonstrated that the output performance of EMGs is proportional to the square of the frequency, while that of TENGs is approximately in proportion to the frequency. Therefore, the TENG has a much better performance than that of the EMG at low frequency (typically 0.1–3 Hz). Importantly, the extremely small output voltage of the EMG at low frequency makes it almost inapplicable to drive any electronic unit that requires a certain threshold voltage (∼0.2–4 V), so that most of the harvested energy is wasted. In contrast, a TENG has an output voltage that is usually high enough (>10–100 V) and independent of frequency so that most of the generated power can be effectively used to power the devices. Furthermore, a TENG also has advantages of light weight, low cost, and easy scale up through advanced structure designs. All these merits verify the possible killer application of a TENG for harvesting energy at low frequency from motions such as human motions for powering small electronics and possibly ocean waves for large-scale blue energy.