Toward Paper-Based Sensors: Turning Electrical Signals into an Optical Readout System

详细信息    查看全文

• 作者：Devi D. Liana ; Burkhard Raguse ; J. Justin Gooding ; Edith Chow
• 刊名：ACS Applied Materials & Interfaces
• 出版年：2015
• 出版时间：September 2, 2015
• 年：2015
• 卷：7
• 期：34
• 页码：19201-19209
• 全文大小：395K
• ISSN：1944-8252

文摘

Paper-based sensors are gaining increasing attention for their potential applications in resource-limited settings and for point-of-care analysis. However, chemical analysis of paper-based electronic sensors is frequently interpreted using complex software and electronic displays which compromise the advantages of using paper. In this work, we present two semiquantitative paper-based readout systems that can visually measure a change in resistance of a resistive-based sensor. The readout systems use electrochromic Prussian blue/polyaniline as an electrochromic indicator on a resistive gold nanoparticle film that is fabricated on paper. When the readout system is integrated with a resistive sensor in an electrical circuit, and a voltage is applied, the voltage drop along the readout system varies depending on the sensor鈥檚 resistance. Due to the voltage gradient formed along the gold nanoparticle film, the overlaying Prussian blue/polyaniline will change color at voltages greater than its reduction voltage (green/blue for oxidized state and transparent for reduced state). Thus, the changes in resistances of a sensor can be semiquantified through color visualization by either measuring the length of the transparent film (analog readout system) or by counting the number of transparent segments (digital readout system). The work presented herein can potentially serve as an alternative paper-based display system for resistive sensors in instances where cost and weight is a premium.