Molten Slag Flow and Phase Transformation Behaviors in a Slagging Entrained-Flow Coal Gasifier
详细信息 查看全文
- 作者：Jianjun Ni ; Zhijie Zhou ; Guangsuo Yu ; Qinfeng Liang ; Fuchen Wang
- 刊名：Industrial & Engineering Chemistry Research
- 出版年：2010
- 出版时间：December 1, 2010
- 年：2010
- 卷：49
- 期：23
- 页码：12302-12310
- 全文大小：460K
- 年卷期：v.49,no.23(December 1, 2010)
- ISSN：1520-5045
文摘
A slag flow submodel has been developed to simulate the slag flow and phase transformation behaviors in coal gasifiers. The volume of the fluid (VOF) model is used to capture the free surface of the slag flow, and the continuum surface force (CSF) model is employed to calculate the surface tension between the gas phase and the liquid slag phase. The slag is treated as a Newtonian fluid when the slag temperature is above the critical viscosity temperature (Tcv), and plastic fluid is treated when the slag temperature is between the flow temperature (Tf) and the Tcv. The ash particle deposition, viscosity−temperature dependence, and different thermal conductivity for different slag phase are all included in the present simulation. For membrane wall coal gasification, the liquid slag and solid slag layer increases along the flow and total slag thickness increases as the operating temperature decreases. The velocity profiles and viscosity profiles at different operating temperatures are performed. The liquid slag flow will produce fluctuations when the slag temperature decreases to the lowest at the bottom of the gasifier. In addition, the temperature difference (To − Tf) between 150 and 200 °C is suitable for a membrane wall coal entrained-flow gasifier. For refractory wall coal gasification, the thicker refractory bricks can effectively prevent the heat lost from the gasifier wall, so the slag flow is steady when the operating temperature is higher than the critical operating temperature. An expression of solid slag layer formation criterion has been deduced from heat-transfer balance. The critical operating temperature of the different slag mass flow rate is studied by heat-transfer balance. In addition, the solid slag layer will rapidly increase as the operating temperature decreases to critical operating temperature.