Ionic Conductor with High Conductivity as Single-Component Electrolyte for Efficient Solid-State Dye-Sensitized Solar Cells
详细信息 查看全文
- 作者：Hong Wang ; Juan Li ; Feng Gong ; Gang Zhou ; Zhong-Sheng Wang
- 刊名：Journal of the American Chemical Society
- 出版年：2013
- 出版时间：August 28, 2013
- 年：2013
- 卷：135
- 期：34
- 页码：12627-12633
- 全文大小：375K
- 年卷期：v.135,no.34(August 28, 2013)
- ISSN：1520-5126
文摘
Imidazolium iodide is an often used component in iodine-based dye-sensitized solar cells (DSSCs), but it cannot operate an efficient DSSC in the absence of iodine due to its low conductivity. For this study, lamellar solid iodide salts of imidazolium or piperidinium with an N-substituted propargyl group have been prepared and applied in solid-state DSSCs. Owing to the high conductivity arising from the lamellar structure, these solid-state ionic conductors can be used as single-component solid electrolytes to operate solid-state DSSCs efficiently without any additives in the electrolyte and post-treatments on the dye-loaded TiO2 films. With a propargyl group attached to the imidazolium ring, the conductivity is enhanced by about 4 脳 104-fold as compared to the alkyl-substituted imidazolium iodide. Solid-state DSSC with the 1-propargyl-3-methylimidazolium iodide as the single-component solid-state electrolyte has achieved a light-to-electricity power conversion efficiency of 6.3% under illumination of simulated AM1.5G solar light (100 mW cm鈥?), which also exhibits good long-term stability under continuous 1 sun soaking for 1500 h. This finding paves the way for development of high-conductivity single-component solid electrolytes for use in efficient solid-state DSSCs.