Rapidly Cross-Linkable DOPA Containing Terpolymer Adhesives and PEG-Based Cross-Linkers for Biomedical Applications

详细信息    查看全文

• 作者：Hoyong Chung ; Robert H. Grubbs
• 刊名：Macromolecules
• 出版年：2012
• 出版时间：December 21, 2012
• 年：2012
• 卷：45
• 期：24
• 页码：9666-9673
• 全文大小：414K
• 年卷期：v.45,no.24(December 21, 2012)
• ISSN：1520-5835

文摘

A new three-component bio-inspired adhesive was synthesized that is a terpolymer composed of a water-soluble segment, an interfacial adhesion segment, and a cross-linking segment. Strong wet adhesion properties are obtained utilizing a 3,4-dihydroxy-l-phenylalanine (DOPA) moiety. Poly(acrylic acid) provides high water solubility due to strong ionic interactions with water. An acrylic acid N-hydroxysuccinimide ester (NHS) was included in the adhesive polymer to allow rapid cross-linking with thiol-terminated, 3-armed poly(ethylene glycol) cross-linking agents. The thiol terminal poly(ethylene glycol) was designed to be bulky to avoid possible penetration of molecules to the cell and tissue. The NHS and thiol groups react within 30 s to form covalent bonds. This design allows for rapid optimization of properties for specific applications. Lap shear strength tests on wet porcine skin demonstrated a 190% increased value in adhesion strength for adhesives having the DOPA moiety. After cross-linking, adhesion was enhanced by 450% over poly(acrylic acid-co-acrylic acid NHS) and was 240% higher than un-cross-linked poly(acrylic acid-co-acrylic acid NHS-co-N-methacryloyl-3,4-dihydroxyl-l-phenylalanine). Rheology studies show adhesive viscosity drops significantly at high shear rates, demonstrating its potential to be injected via syringe. The cross-linked adhesive displayed much stronger mechanical properties and higher elastic and viscous moduli than an un-cross-linked adhesive model. Furthermore, the cross-linked adhesive has enhanced moduli near body temperature (38 掳C) as compared to room temperature (23 掳C), increasing the applications as a biomedical adhesive.