Determination of Diffusion Coefficient for Alkane Solvent–CO2 Mixtures in Heavy Oil with Consideration of Swelling Effect

详细信息    查看全文

• 作者：Sixu Zheng ; Huazhou Andy Li ; Huijuan Sun ; Daoyong Yang
• 刊名：Industrial & Engineering Chemistry Research
• 出版年：2016
• 出版时间：February 17, 2016
• 年：2016
• 卷：55
• 期：6
• 页码：1533-1549
• 全文大小：724K
• ISSN：1520-5045

文摘

A generalized methodology has been developed and successfully applied to determine diffusion coefficient of alkane solvent–CO₂–heavy oil systems with consideration of swelling effect. Theoretically, a one-dimensional and one-way mass transfer model incorporating the volume translated Peng–Robinson equation of state (PR EOS) has been developed to describe the mass transfer from alkane solvent–CO₂ mixture to heavy oil, which accounts for the oil swelling effect resulted from gas dissolution. The heavy oil sample has been characterized as three pseudocomponents, while the binary interaction parameter (BIP) correlations are tuned with the experimentally measured saturation pressures. Both apparent diffusion coefficients for gas mixtures and individual diffusion coefficient of each component of a mixture are determined once the discrepancy between the measured and calculated dynamic swelling factors of heavy oil has been minimized. The volume translated PR EOS with the three characterized pseudocomponents and the tuned BIP correlations is able to accurately predict the phase behavior of alkane solvent–CO₂–heavy oil systems. Compared to the apparent diffusion coefficient, better agreements between the measured and calculated dynamic swelling factors have been obtained by use of the individual diffusion coefficients. Addition of C₃H₈ into CO₂ stream is found to not only diffuse faster into heavy oil than CO₂ but also contribute to a larger degree of oil swelling, leading to a faster and enhanced swelling effect of C₃H₈–CO₂–heavy oil system in comparison with the CO₂–heavy oil system.