Surface-Enhanced Raman Spectroscopy Amplification with Film over Etched Nanospheres
详细信息 查看全文
- 作者：Jean-Francois Masson ; Kirsty F. Gibson ; Audrey Provencher-Girard
- 刊名：Journal of Physical Chemistry C
- 出版年：2010
- 出版时间：December 30, 2010
- 年：2010
- 卷：114
- 期：51
- 页码：22406-22412
- 全文大小：341K
- 年卷期：v.114,no.51(December 30, 2010)
- ISSN：1932-7455
文摘
Polymer nanosphere lithography (NSL) masks were etched in oxygen plasma prior to metal deposition, which tunes the localized surface plasmon resonance (LSPR) and the interparticle distance resulting in greater Raman amplification than conventional film over nanosphere (FON). Various nanosphere masks were investigated, using nanosphere sizes of 220, 360, 450, 520, and 650 nm etched from 0 (conventional FON) to 10 min. Thereby, the film over etched nanospheres (FOEN) amplifies by up to a factor of 4 the Raman response of 4-nitrobenzenethiol (4-NBT) on Ag as compared to unetched FON. The LSPR response of FOEN and SEM analysis of the gap distance revealed that the optimal amplification results from a combination of tuning the gap (a gap/diameter of less than 1 improves the Raman response), matching the laser excitation wavelength (633 and 785 nm both investigated), and an increasing roughness of FOEN. Metal multilayers of Ag and Au were also deposited to investigate the effect on the Raman and LSPR response. While the LSPR response remains relatively invariable, the Raman signal from 4-NBT decreased significantly by increasing the number of layers when Ag is used as the outer layer. However, a bimetallic film composed of Ag underlayer with Au as an outerlayer further increased the Raman response by a factor of 1.6. Overall, the most intense Raman response for FOEN was obtained with 360 nm nanospheres, etched for 1.5 min to create a gap of 66 nm with an overall bimetallic film thickness of 175 nm, which was composed of an Ag underlayer of 87.5 nm and an Au outerlayer of 87.5 nm. Thus, by performing these simple modifications to FON, the Raman response can be increased by nearly 1 order of magnitude.