Detecting Microbially Induced Calcite Precipitation in a Model Well-Bore Using Downhole Low-Field NMR

详细信息    查看全文

• 作者：Catherine M. Kirkland ; Sam Zanetti ; Elliot Grunewald ; David O. Walsh ; Sarah L. CoddAdrienne J. Phillips
• 刊名：Environmental Science & Technology
• 出版年：2017
• 出版时间：February 7, 2017
• 年：2017
• 卷：51
• 期：3
• 页码：1537-1543
• 全文大小：454K
• ISSN：1520-5851

文摘

Microbially induced calcite precipitation (MICP) has been widely researched recently due to its relevance for subsurface engineering applications including sealing leakage pathways and permeability modification. These applications of MICP are inherently difficult to monitor nondestructively in time and space. Nuclear magnetic resonance (NMR) can characterize the pore size distributions, porosity, and permeability of subsurface formations. This investigation used a low-field NMR well-logging probe to monitor MICP in a sand-filled bioreactor, measuring NMR signal amplitude and T₂ relaxation over an 8 day experimental period. Following inoculation with the ureolytic bacteria, Sporosarcina pasteurii, and pulsed injections of urea and calcium substrate, the NMR measured water content in the reactor decreased to 76% of its initial value. T₂ relaxation distributions bifurcated from a single mode centered about approximately 650 ms into a fast decaying population (T₂ less than 10 ms) and a larger population with T₂ greater than 1000 ms. The combination of changes in pore volume and surface minerology accounts for the changes in the T₂ distributions. Destructive sampling confirmed final porosity was approximately 88% of the original value. These results indicate the low-field NMR well-logging probe is sensitive to the physical and chemical changes caused by MICP in a laboratory bioreactor.