Separation of Phenols from Oil Using Imidazolium-Based Ionic Liquids
详细信息 查看全文
- 作者：Yucui Hou ; Yuehong Ren ; Wei Peng ; Shuhang Ren ; Weize Wu
- 刊名：Industrial & Engineering Chemistry Research
- 出版年：2013
- 出版时间：December 18, 2013
- 年：2013
- 卷：52
- 期：50
- 页码：18071-18075
- 全文大小：239K
- 年卷期：v.52,no.50(December 18, 2013)
- ISSN：1520-5045
文摘
Phenolic compounds, which are important substances in industry, are mainly derived from coal liquefaction oil, coal tar, and petroleum, and also from biomass via pyrolysis. However, the traditional process of separation of phenols from oil using water, NaOH, and H2SO4 causes serious environmental problems. In this work, imidazolium-based ionic liquids (ILs) were used to extract phenol from a model oil of hexane and phenol in order to reduce environmental risk. It was found that these ILs could successfully separate phenols from hexane, and a small amount of [Bmim]Cl, equimolar to that of phenol in hexane, was enough to extract phenol with a high extraction efficiency of 99%. Anions of imidazolium-based ILs have a significant influence on the phenol extraction efficiency, which follows the order: Cl鈥?/sup> > Br鈥?/sup> > BF4鈥?/sup> > PF6鈥?/sup>. But the cation of these ILs shows a relatively small influence on the extraction. Particularly, [Bmim]Cl shows best performance in terms of phenol extraction efficiency. Furthermore, it is not sensitive to temperature changes and can be performed at ambient temperature. The extracted phenol in ILs could be recovered by evaporation, and the regenerated ILs could be reused for four cycles with no obvious loss in the phenol extraction efficiency. [Bmim]Cl was also used to extract phenols from real coal liquefaction oil, and the extraction efficiency of phenols could reach 90%.