Insulating Material Requirements for Low-Power-Consumption Electrowetting-Based Liquid Lenses

详细信息    查看全文

• 作者：Stéphanie ChevalliotGéraldine Malet ; Herbert Keppner ; Bruno Berge
• 刊名：Langmuir
• 出版年：2016
• 出版时间：December 27, 2016
• 年：2016
• 卷：32
• 期：51
• 页码：13585-13592
• 全文大小：553K
• ISSN：1520-5827

文摘

Insulating materials from the parylene family were investigated for use in low-power-consumption electrowetting-based liquid lenses. It was shown that for DC-driven operations, parylene C leads to hysteresis, regardless of the presence of a hydrophobic top coat. This hysteresis was attributed to the non-negligible time needed to reach a stable contact angle, due to charge injection and finite conductivity of the material. It was further demonstrated that by using materials with better insulating properties, such as parylene HT and VT4, satisfactory results can be obtained under DC voltages, reaching a low contact angle hysteresis of below 0.2°. We propose a simplified model that takes into account the injection of charges from both sides of the insulating material (the liquid side and the electrode side), showing that electrowetting response can be both increased and decreased.