Versatile Polymer-Free Graphene Transfer Method and Applications
详细信息 查看全文
- 作者：Guohui Zhang ; Aleix G. Güell ; Paul M. Kirkman ; Robert A. Lazenby ; Thomas S. Miller ; Patrick R. Unwin
- 刊名：ACS Applied Materials & Interfaces
- 出版年：2016
- 出版时间：March 30, 2016
- 年：2016
- 卷：8
- 期：12
- 页码：8008-8016
- 全文大小：521K
- ISSN：1944-8252
文摘
A new method for transferring chemical vapor deposition (CVD)-grown monolayer graphene to a variety of substrates is described. The method makes use of an organic/aqueous biphasic configuration, avoiding the use of any polymeric materials that can cause severe contamination problems. The graphene-coated copper foil sample (on which graphene was grown) sits at the interface between hexane and an aqueous etching solution of ammonium persulfate to remove the copper. With the aid of an Si/SiO2 substrate, the graphene layer is then transferred to a second hexane/water interface to remove etching products. From this new location, CVD graphene is readily transferred to arbitrary substrates, including three-dimensional architectures as represented by atomic force microscopy (AFM) tips and transmission electron microscopy (TEM) grids. Graphene produces a conformal layer on AFM tips, to the very end, allowing easy production of tips for conductive AFM imaging. Graphene transferred to copper TEM grids provides large-area, highly electron-transparent substrates for TEM imaging. These substrates can also be used as working electrodes for electrochemistry and high-resolution wetting studies. By using scanning electrochemical cell microscopy, it is possible to make electrochemical and wetting measurements at either a freestanding graphene film or a copper-supported graphene area and readily determine any differences in behavior.