Effects of Regioregularity and Molecular Weight on the Growth of Polythiophene Nanofibrils and Mixes of Short and Long Nanofibrils To Enhance the Hole Transport

详细信息    查看全文

• 作者：Yujeong Lee ; Jin Young Oh ; Sung Yun Son ; Taiho Park ; Unyong Jeong
• 刊名：ACS Applied Materials & Interfaces
• 出版年：2015
• 出版时间：December 23, 2015
• 年：2015
• 卷：7
• 期：50
• 页码：27694-27702
• 全文大小：632K
• ISSN：1944-8252

文摘

Morphological control over polythiophenes has been widely studied; however the impacts of regioregularity (RR) and molecular weight (MW) on their structural development have not been investigated systematically. This study examined a representative polythiophene, poly(3-hexylthiophene) (P3HT), to reveal that small differences in the RR can produce a large difference in the growth of nanofibrils. Low-RR P3HTs generated neat long nanofibrils (LNFs), whereas high-RR P3HTs formed short nanofibrils (SNFs). This study identified a critical RR (96–98%) depending on their MW, below which P3HT grew into LNFs and above which P3HT grew into SNFs. This study also found that the mixing ratio between high-RR P3HT and a low-RR P3HT in the solution phase is strongly correlated with the relative populations of SNF and LNF in the coated film. This study suggested that mixing high-RR and low-RR polymers may be a good strategy to optimize the electrical properties of polythiophenes for target applications. As an example, a mixture of high-RR (75%) P3HT and low-RR P3HT (25%) improved considerably the power conversion efficiency of bulk heterojunction polymer solar cells compared with the values obtained from the pure high-RR P3HT and the pure low-RR P3HT.