Structure and properties of aluminium–magnesium casting alloys after heat treatment

详细信息    查看全文

• 作者：Mariusz Król ; Tomasz Tański…
• 关键词：Thermal ; derivative analysis ; Dendrite coherency point ; Heat treatment ; Structure ; Aluminium alloy ; Tensile properties
• 刊名：Journal of Thermal Analysis and Calorimetry
• 出版年：2017
• 出版时间：January 2017
• 年：2017
• 卷：127
• 期：1
• 页码：299-308
• 全文大小：1962KB
• 刊物类别：Chemistry and Materials Science
• 刊物主题：Physical Chemistry; Analytical Chemistry; Polymer Sciences; Inorganic Chemistry; Measurement Science and Instrumentation;
• 出版者：Springer Netherlands
• ISSN：1588-2926
• 卷排序：127

文摘

Since the forming of the microstructure depends on the specific of the casting method, which directly affects further mechanical and physical properties of the material, it is important to understand how to control the microstructure of the cast to understand changes that taking place during the crystallisation process. For estimating the metallurgical quality of the liquid metal before casting, the thermal-derivative analysis (TDA) is utilised. The TDA has been used for a long time, in both ferrous and non-ferrous industries casting. The Universal Metallurgical Simulator and Analyser (UMSA) platform is a rapid, sensitive and economical method of determining a full range of solidification features. The work focuses on the thermal analysis and heat treatment of aluminium alloys. The liquidus and solidus temperatures and dendrite coherency point (DCP) are then characterised. The research shows that the UMSA platform allows precise determination and calculation of thermal parameters. The influence of the heat treatment on structure and properties of aluminium castings has been determined as well. Heat treatment was carried out to increase the mechanical properties of aluminium alloys. Based on the findings above, the influence of microstructure on properties of the alloys is discussed.