Filtration Efficiency of Functionalized Ceramic Foam Filters for Aluminum Melt Filtration
详细信息 查看全文
- 作者：Claudia Voigt ; Eva Jäckel ; Fabio Taina…
- 刊名：Metallurgical and Materials Transactions B
- 出版年：2017
- 出版时间：February 2017
- 年：2017
- 卷：48
- 期：1
- 页码：497-505
- 全文大小：
- 刊物类别：Chemistry and Materials Science
- 刊物主题：Metallic Materials; Characterization and Evaluation of Materials; Structural Materials; Surfaces and Interfaces, Thin Films; Nanotechnology;
- 出版者：Springer US
- ISSN：1543-1916
- 卷排序：48
文摘
The influence of filter surface chemistry on the filtration efficiency of cast aluminum alloys was evaluated for four different filter coating compositions (Al2O3—alumina, MgAl2O4—spinel, 3Al2O3·2SiO2—mullite, and TiO2—rutile). The tests were conducted on a laboratory scale with a filtration pilot plant, which facilitates long-term filtration tests (40 to 76 minutes). This test set-up allows the simultaneous use of two LiMCAs (before and after the filter) for the determination of the efficiency of inclusion removal. The four tested filter surface chemistries exhibited good thermal stability and mechanical robustness after 750 kg of molten aluminum had been cast. All four filter types exhibited a mean filtration efficiency of at least 80 pct. However, differences were also observed. The highest filtration efficiencies were obtained with alumina- and spinel-coated filter surfaces (>90 pct), and the complete removal of the largest inclusions (>90 µm) was observed. The efficiency was slightly lower with mullite- and rutile-coated filter surfaces, in particular for large inclusions. These observations are discussed in relation to the properties of the filters, in particular in terms of, for example, the surface roughness.