Nanorods on surface of GaN-based thin-film LEDs deposited by post-annealing after photo-assisted chemical etching

详细信息    查看全文

• 作者：Lung-Chien Chen ; Wun-Wei Lin ; Te-Yu Liu
• 关键词：Photo ; enhanced post ; annealing ; Laser lift ; off ; KOH ; Nanorods
• 刊名：Nanoscale Research Letters
• 出版年：2017
• 出版时间：December 2017
• 年：2017
• 卷：12
• 期：1
• 全文大小：1007KB
• 刊物主题：Nanotechnology; Nanotechnology and Microengineering; Nanoscale Science and Technology; Nanochemistry; Molecular Medicine;
• 出版者：Springer US
• ISSN：1556-276X
• 卷排序：12

文摘

This study investigates the optoelectronic characteristics of gallium nitride (GaN)-based thin-film light-emitting diodes (TF-LEDs) that are formed by a two-step transfer process that involves wet etching and post-annealing. In the two-step transfer process, GaN LEDs were stripped from sapphire substrates by the laser lift-off (LLO) method using a KrF laser and then transferred onto ceramic substrates. Ga-K nanorods were formed on the surface of the GaN-based TF-LEDs following photo-assisted chemical etching and photo-enhanced post-annealing at 100 °C for 1 min. As a result, the light output power of GaN-based TF-LEDs with wet etching and post-annealing was over 72% more than that of LEDs that did not undergo these treatments.