Identification and quantification by ¹H nuclear magnetic resonance spectroscopy of seven plasticizers in PVC medical devices

详细信息    查看全文

• 作者：Stéphanie Genay ; Frédéric Feutry ; Morgane Masse…
• 关键词：Nuclear magnetic resonance ; Plasticizers ; Polyvinyl chloride ; Medical devices ; Biomaterials ; Polymers
• 刊名：Analytical and Bioanalytical Chemistry
• 出版年：2017
• 出版时间：February 2017
• 年：2017
• 卷：409
• 期：5
• 页码：1271-1280
• 全文大小：
• 刊物类别：Chemistry and Materials Science
• 刊物主题：Analytical Chemistry; Biochemistry, general; Laboratory Medicine; Characterization and Evaluation of Materials; Food Science; Monitoring/Environmental Analysis;
• 出版者：Springer Berlin Heidelberg
• ISSN：1618-2650
• 卷排序：409

文摘

Medical devices are generally made of polyvinyl chloride plasticized by six authorized plasticizers as alternatives to di-(2-ethylhexyl)-phthalate (DEHP) classified as reprotoxic class 1b. These are acetyl tri-n-butyl citrate (ATBC), di-(2-ethylhexy) adipate (DEHA), di-(2-ethylhexyl) terephthalate (DEHT), di-isononyl cyclohexane-1,2-dicarboxylate (DINCH), di-isononyl phthalate (DINP), and tri-octyl trimellitate (TOTM). The main objective of this study was to propose a new method using 1H NMR spectroscopy to determine and quantify these seven plasticizers in PVC sheets, standard infusion tubings, and commercially available medical devices. Two techniques were compared: dissolution in deuterated tetrahydrofuran and extraction by deuterated chloroform. Plasticizer 1H NMR spectra were very similar in both deuterated solvents; dissolution and extraction provided similar results. The sensitivity of this method enabled us to detect and quantify the presence of minor plasticizers in PVC. In nine commercially available samples, the major plasticizer was identified and quantified by 1H NMR. In six samples, one, two, or three minor plasticizers were identified and also quantified. DEHP was detected in only one tubing. NMR is therefore very convenient for studying plasticizers contained in medical devices. Only small quantities of solvents and sample are required. It is not necessary to dilute samples to enter a quantification range, and it is sufficiently sensitive to detect contaminants.