Experimental study of the pinned double rectangular tube assembled buckling-restrained brace

详细信息    查看全文

• 作者：Zi-qin Jiang ; Yan-lin Guo ; Ai-lin Zhang…
• 关键词：Double ; rectangular tube assembled buckling ; restrained brace (DRT ; ABRB) ; Construction detail ; Hysteretic behaviour ; Failure mode ; High strength bolt
• 刊名：Journal of Zhejiang University-SCIENCE A
• 出版年：2017
• 出版时间：January 2017
• 年：2017
• 卷：18
• 期：1
• 页码：20-32
• 全文大小：
• 刊物类别：Engineering
• 刊物主题：Mechanical Engineering; Civil Engineering; Classical and Continuum Physics; Industrial Chemistry/Chemical Engineering;
• 出版者：Zhejiang University Press
• ISSN：1862-1775
• 卷排序：18

文摘

In this study, seven pinned double-rectangular tube assembled buckling-restrained brace (DRT-ABRB) specimens were experimentally characterised by means of an axial cyclic test. The core member of the specimens was a single flat-plate. Two rectangular tubes were assembled using high strength bolts to form an external restraining member. Each rectangular tube was composed of an external steel channel and a cover plate. A gap or thin rubber filler was set between the core and the external restraining member to form an unbonded layer. The influence of several design parameters on the failure mode and energy dissipation capacity of the ABRB was investigated, including the height of the core wing plate, thickness of the external cover plate, and height of the external channel flange. This experimental study demonstrated that a local pressure-bearing failure at the end of the external member arises when the external cover plate is too thin or if the end construction detail is unreasonable. When the end rotations of the DRT-ABRB were restricted, the hysteretic performance was shown to be superior to that of a pure pinned DRT-ABRB. Finally, all the tested DRT-ABRBs exhibited excellent energy dissipation performance which amply satisfied existing regulation requirements.