Drift as a Function of Temperature in Platinum–Rhodium-Alloyed Thermoelements
详细信息 查看全文
- 作者：E. S. Webster ; F. Edler
- 关键词：Drift ; Inhomogeneity ; Noble metal ; Platinum–rhodium alloys ; Thermocouples ; Uncertainty
- 刊名：International Journal of Thermophysics
- 出版年：2017
- 出版时间：February 2017
- 年：2017
- 卷：38
- 期：2
- 全文大小：
- 刊物类别：Physics and Astronomy
- 刊物主题：Condensed Matter Physics; Classical Mechanics; Industrial Chemistry/Chemical Engineering; Physical Chemistry;
- 出版者：Springer US
- ISSN：1572-9567
- 卷排序：38
文摘
Platinum–rhodium-alloyed thermocouples are the most commonly used high-temperature reference thermometer in national measurement institutes, second tier laboratories and industry. Despite the common use of these thermocouples, there is still a great deal that is not known about the drift processes that occur in them. Drift processes in these alloys are known to be made up of three main components: crystallographic changes, rhodium oxidation and migration, and contamination. Through careful use, contamination can be largely avoided; however, the other two processes often cannot. Research on drift in the different platinum–rhodium alloys is important because the largest uncertainty component during calibration of these thermocouple types is due to inhomogeneity, and the same mechanisms responsible for inhomogeneity are responsible for the drift. This study investigates the drift processes as a function of temperature and time for the 5 %, 13 %, 17 %, 20 %, 30 % and 40 % Rh alloys when paired with pure platinum. The use of a linear gradient furnace and high-resolution homogeneity scanner has enabled identification of drift characteristics in the temperature range \(100 \,^{\circ }\)C to \(950 \,^{\circ }\)C, where the bulk of reversible drift occurs. The experiments have quantified the drift rates and magnitude for thermoelements given two commonly used annealing procedures: the high-temperature quench anneal and the low-temperature vacancy anneal. Consequently, this study provides users of platinum–rhodium thermoelements with guidance on what levels of drift they should expect and exposure times before re-annealing is required. It also shows that a Pt–Rh alloy of 20 % Rh is by far the most stable and has properties comparable to the Pt–Pd thermocouple.