Drying of a cellulose II gel: effect of physical modification and redispersibility in water

详细信息    查看全文

• 作者：Marco Beaumont ; Jakob König ; Martina Opietnik ; Antje Potthast ; Thomas Rosenau
• 关键词：Cellulose ; Nanocellulose ; Drying ; Hornification ; Redispersibility ; Cellulose II gel ; TENCEL®
• 刊名：Cellulose
• 出版年：2017
• 出版时间：March 2017
• 年：2017
• 卷：24
• 期：3
• 页码：1199-1209
• 全文大小：1452KB
• 刊物类别：Chemistry and Materials Science
• 刊物主题：Bioorganic Chemistry; Physical Chemistry; Organic Chemistry; Polymer Sciences;
• 出版者：Springer Netherlands
• ISSN：1572-882X
• 卷排序：24

文摘

The agglomeration of cellulosic materials upon drying, often called hornification, causes a reduction of water retention, among other undesired effects. It is one of the main issues in industrial cellulose processing, especially with regard to nanocelluloses. As a consequence, high transportation and storage costs arise since nanocelluloses need to remain in aqueous suspensions unless trade-offs in reactivity, redispersibility and surface properties are accepted. In this study, different drying strategies for TENCEL® gel, a nanostructured gel derived from the Lyocell process consisting of spherical particles, are compared and evaluated. First, freeze-drying with consideration of the influence of freezing temperature and the use of tert-butanol as cryo-protectant, and second, simple oven-drying at 60 °C. Surprisingly, oven-dried xerogels showed higher water retention values and also better colloidal stability than the cryogels. This is in stark contrast to cellulose nanofibrils for which freeze-drying has been shown to be significantly superior to oven drying in terms of redispersibility. For the TENCEL® gel, oven-drying was thus selected and the influence of additives on the redispersibility of the cellulose II gel was studied by means of the common water retention value, particle size, colloidal stability, appearance of the redispersed gel and viscosity. The addition of the polysaccharides carboxymethyl cellulose or xanthan showed the most promising results with regard to redispersibility. Also sucrose and ammonium bicarbonate provided higher colloidal stabilities than that of the untreated TENCEL® gel. The redispersibility of the cellulose II xerogels could thus be significantly improved by simple and cost-efficient mixing with additives prior to drying.