Impact of Experimental Uncertainties on the Identification of Mechanical Material Properties using DIC

详细信息    查看全文

• 作者：Michele Badaloni ; Marco Rossi ; Gianluca Chiappini ; Pascal Lava…
• 关键词：Simulated experiments ; Digital Image Correlation ; Full ; field measurements ; Material identification ; Experimental uncertainties
• 刊名：Experimental Mechanics
• 出版年：2015
• 出版时间：October 2015
• 年：2015
• 卷：55
• 期：8
• 页码：1411-1426
• 全文大小：1,683 KB
• 参考文献：1.Grédiac M (2004) The use of full-field measurement methods in composite material characterization: interest and limitations. Compos Part A-Appl S 35:751-61CrossRef
  2.Avril S, Bonnet M, Bretelle A-S, Grédiac M, Hild F, Ienny P, Latourte F, Lemosse D, Pagano S, Pagnacco E, Pierron F (2008) Overview of identification methods of mechanical parameters based on full-field measurements. Exp Mech 48:381-02CrossRef
  3.Pierron F, Grédiac M (2012) The virtual fields Method. Springer
  4.Sutton M.A., Orteu J-J, Schreier HW (2009) Image Correlation for Shape, Motion and Deformation Measurements. Springer
  5.Piro J-L, Grédiac M (2004) Producing and transferring low-spatial-frequency grids fo measuring displacement fields with moiré and grid methods. Exp Tech 28:23-6CrossRef
  6.Grédiac M, Pierron F, Avril S, Toussaint E (2006) The virtual fields method for extracting constitutive parameters from full-field measurements: a review. Strain 42:233-53CrossRef
  7.Lecompte D, Cooreman S, Coppieters S, Vantomme H, andand Sol J, Debruyne D (2009) Parameter identification for anisotropic plasticity model using digital image correlation, Comparison Between Uni-axial Bi-axial Tensile Test. Eur J Comput Mech 18:393-18
  8.Cooreman S, Lecompte D, Sol H, Vantomme J, Debruyne D (2008) Identification of mechanical material behavior through inverse modeling and DIC. Exp Mech 48(4):421-33CrossRef
  9.Grédiac M, Vautrin A (1990) A new method for determination of bending rigidities of thin anisotropic plates. J Appl Mech 57:964-68CrossRef
  10.Moulart R, Avril S, Pierron F (2006) Identification of the through-thickness rigidities of a thick laminated composite tube. Compos Part A-Appl S 37:326-36CrossRef
  11.Giraudeau A, Pierron F (2005) Identification of stiffness and damping properties of thin isotropic vibrating plates using the virtual fields method. theory and simulations. J Sound Vib 284:757-81CrossRef
  12.Rossi M, Pierron F (2012) On the use of simulated experiments in designing test from material characterization from full-field measurement. Int J Solids Struct 49:420-35CrossRef
  13.Lava P, Rossi M, Badaloni M, Debruyne D, Pierron F (2013) Digital image correlation and virtual fields to design an optimized experimental setup for material identification. In: Photomechanics 2013
  14.Wang Y, Lava P, Coppieters S, De Strycker P, Van Houtte P, Debruyne D (2012) Investigation of the uncertainty of DIC under heterogeneous strain states with numerical test. Strain 48(6):453-62CrossRef
  15.Bornet M, Brémand F, Doumalin P, Dupré JC, Fazzini M, Grédiac M, Hild F, Mistou S, Molimard J, Orteu JJ, Robert L, Surrel Y, Vacher P, Wattrisse B (2009) Assessment of digital image correlation measurement errors: methodology and results. Exp Mech 49:353-70CrossRef
  16.Lava P, Cooreman S, Coppieters S, De Strycker M, Debruyne D (2009) Assessment of measuring errors in DIC using deformation fields generated by plastic FEA. Opt Lasers Eng 47:747-53CrossRef
  17.Lava P, Cooreman S, Debruyne D (2010) Study of systematic errors in strain fields obtained via DIC using heterogeneous deformation generated by plastic FEA. Opt Lasers Eng 48:457-68CrossRef
  18.Rossi M, Pierron F, Lava P, Debruyne D, Sasso M (2015) Effect of DIC spatial resolution, noise and interpolation error on identification results with the VFM. Strain, doi:10.-111/?str12134
  19.Wittewrongel L, Lava P, Lomov S, Debruyne D (2014) A self adaptive global digital image correlation algorithm. Experimental Mechanics, doi:10.-007/?s11340-014-9946-3
  20.Lecompte D, Smits A, Bossuyt S, Sol H, Vantomme J, Van Hemelrijck D, Habraken AM (2006) Quality assessment of speckle patterns for digital image correlation. Opt Lasers Eng 44:1132-145CrossRef
  21.Hijazi A, Friedl A, Kahler CJ (2011) Influence of camera’s optical axis non-perpendicularity on measurement accuracy of two-dimensional digital image correlation. Jourdan J Mech Ind Eng 4:373-82
  22.Lava P, Coppieters S, Wang Y, Van Houtte P, Debruyne D (2012) Error estimation in measuring strain fields with dic on planar sheet metal specimens with a non-perpendicular camera alignement. Opt Lasers Eng 49:57-5CrossRef
  23. www.?matchID.?org . matchID 2D and 3D software
  24.Reu PI (2011) Experimental and numerical methods for exact subpixel shifting. Exp Mech 51:443-52CrossRef
  25.Grediac M, Sur F (2013) Effect of sensor noise on the resolution and spatial resolution of displacement and strain maps estimated with the grid method. Strain 50:1-7CrossRef
  26.Surrel Y (1999) Photomecanics, chapter Fringe analysis. Springer Berlin, pp 57-04
  27.Chalal H, Avril S, Pierron F, Meraghni F (2006) Experimental identification of a nonlinear model for composites using the grid technique coupled to the virtual fields method. Compos Part A-Appl S 37(2):315-25CrossRef
  28.Sur F, Grédiac M (2014) Sensor noise modeling by stacking pseudo-periodic grid images affected by vibrations. IEEE Sig
• 作者单位：Michele Badaloni (1) (2)
  Marco Rossi (1)
  Gianluca Chiappini (1)
  Pascal Lava (2)
  Dimitri Debruyne (2)
  
  1. Dipartimento di Ingegneria Industriale e Scienze Matematiche (DIISM), Università Politecnica delle Marche, via Brecce bianche 12, 60131, Ancona, Italia
  2. Department of Materials Engineering, University of Leuven, Gebroeders De Smetstraat 1, B-9000, Gent, Belgium
  
• 刊物类别：Engineering
• 刊物主题：Mechanical Engineering
  Theoretical and Applied Mechanics
  Characterization and Evaluation Materials
  Structural Mechanics
  Engineering Fluid Dynamics
  Engineering Design
  
• 出版者：Springer Boston
• ISSN：1741-2765

文摘

This paper is concerned with an in-depth study of the interactions between full-field measurements errors and material identification. It is a further step in a research plan that aims to create a simulation procedure of actual experiments, with the final goal of using the simulator to optimise the test set-up in terms of specimen shape, measurement technique, applied load etc. In particular,here, Digital Image Correlation (DIC) is used as a full-field technique to obtain strain and displacement fields. These maps are used as input in an inverse methodology as, for instance, the virtual fields method (VFM) to obtain the material parameters introducing uncertainties in the characterization. The purpose of this contribution is to bridge the gap between experiments and simulations, in order to obtain predictions as close as possible to reality in terms of identification error. That will be used, as final goal of the general study, to optimize numerically a test set-up configuration, giving a priori the best parameters to use to experimentally identify a specimen. In the present contribute, the operating procedure is to perform real experiments and then to reproduce them numerically. Experimental uncertainties such as noise, lighting conditions, in-plane and out-of-plane motions are treated separately and introduced in the simulator. As such, their impact on the identified material properties can be unambiguously investigated. Here, focus is on the elastic properties of aluminium specimens, i.e. the Young’s modulus and the Poisson ratio and their specific variances due to the aforementioned errors. The simulator predicts reality to a large extent. Keywords Simulated experiments Digital Image Correlation Full-field measurements Material identification Experimental uncertainties