Conductive-bridging random access memory: challenges and opportunity for 3D architecture

详细信息    查看全文

• 作者：Debanjan Jana ; Sourav Roy ; Rajeswar Panja ; Mrinmoy Dutta…
• 关键词：CBRAM ; Conductive bridge ; Resistive switching ; Chalcogenide ; Solid electrolyte ; Bilayer ; Three ; dimensional (3D) ; Memory
• 刊名：Nanoscale Research Letters
• 出版年：2015
• 出版时间：December 2015
• 年：2015
• 卷：10
• 期：1
• 全文大小：3,331 KB
• 刊物主题：Nanotechnology; Nanotechnology and Microengineering; Nanoscale Science and Technology; Nanochemistry; Molecular Medicine;
• 出版者：Springer US
• ISSN：1556-276X

文摘

The performances of conductive-bridging random access memory (CBRAM) have been reviewed for different switching materials such as chalcogenides, oxides, and bilayers in different structures. The structure consists of an inert electrode and one oxidized electrode of copper (Cu) or silver (Ag). The switching mechanism is the formation/dissolution of a metallic filament in the switching materials under external bias. However, the growth dynamics of the metallic filament in different switching materials are still debated. All CBRAM devices are switching under an operation current of 0.1 μA to 1 mA, and an operation voltage of ±2 V is also needed. The device can reach a low current of 5 pA; however, current compliance-dependent reliability is a challenging issue. Although a chalcogenide-based material has opportunity to have better endurance as compared to an oxide-based material, data retention and integration with the complementary metal-oxide-semiconductor (CMOS) process are also issues. Devices with bilayer switching materials show better resistive switching characteristics as compared to those with a single switching layer, especially a program/erase endurance of >105 cycles with a high speed of few nanoseconds. Multi-level cell operation is possible, but the stability of the high resistance state is also an important reliability concern. These devices show a good data retention of >105 s at >85°C. However, more study is needed to achieve a 10-year guarantee of data retention for non-volatile memory application. The crossbar memory is benefited for high density with low power operation. Some CBRAM devices as a chip have been reported for proto-typical production. This review shows that operation current should be optimized for few microamperes with a maintaining speed of few nanoseconds, which will have challenges and also opportunities for three-dimensional (3D) architecture.